OnlineSR-01 Reel rack A · intake station
:00
Get help Press and hold for 1.5 seconds. What is still open under your name is shown first.

Intake SR-01 · SR-01

SR-01 · Reel rack A

T5T4T3T2T1
T2-L10 · unexpected removal since 14:21
R-2026-0175 left without a task. Push the same reel back in: Back in its bay. Otherwise Janus books it Missing at 14:51.T5-L22 · R-2026-0088 is Missing
By: Janus · Missing delay 30 min · 13:22. The bay is dark; its last bay stays as data. Found it? Scan it here and push it into a free bay.Left tower yellow · attention on SR-01: T2-L10 unexpected removal since 14:21.
SMT Line 2 · position 1
  • Green blinking · put a reel in here.
  • Green steady · stored, and the sensor matches the record.
  • Blue blinking · take this reel out.
  • Amber blinking · a reel is here that shouldn't be.
  • Amber steady · here it is. Off by itself after 30 s.
  • Red blinking · a reel left without a take-out, or a fault.
  • Red · stop: fault on this rack.
  • Yellow tower · attention on this rack.
T2-L10 Unexpected removal R-2026-0175 left its bay · 14:21 Missing at 14:51 unless it is back

Yours now

2 open

Finish putting in R-2026-0109

2 500 pcs of PN-SMAJ24A · waiting for its sensor at SR-01-T4-L31

Finish put-in
Waiting at the intake · 5

  • Not put in yet · 2

  • R-2026-0185 · PN-0603-10K
    5 000 pcs · Received at Intake SR-01 · Tue 21:10 · not put in yet
  • R-2026-0186 · PN-SOD123-1N4148
    1 200 pcs · Put back from SMT Line 1 · Tue 21:30 · not put in yet

  • Due back · 3

  • R-2026-0057 · PN-0603-10K
    1 800 pcs expected · 13:48
  • R-2026-0149 · PN-0402-100N
    2 310 pcs expected · 11:20
  • R-2026-0152 · PN-SOT23-2N7002
    quantity Unknown · 13:58
1 more yours
  • Bring back R-2026-0057 from feeder 14
    1 800 pcs expected of PN-0603-10K · due back since 13:48. Count what is left when it comes back.
Recent

Stored R-2026-0042 at SR-01-T3-L14 · 14:32

Missing R-2026-0088 · T5-L22 · By: Janus · 13:22

Scan to start

Put inScan a reel · any free bay5 waiting

I don't see the light

Guidance never proves anything: the sensor does. Here is each bay on the screen instead.

The bay shown on the screen is the one: its tier, then its bay counted from the left.

Then: take it out, or push the reel in, as the screen says. The sensor moves the screen on. A lamp that never lights goes to a supervisor with Get help.

Enter quantity

The quantity printed on the reel, or your count. It replaces Unknown as its first quantity: no approval, no variance.

Type a code

A reel id, bay, part, work order or the whole barcode.

Language

For you at this station. It follows your badge.

Not Eszter Szabó?

Scan your badge. Looking something up needs no badge. A put-in or take-out is recorded under the name shown, and open work stays with its owner unless you take it over.

Scan your badge

No badge? Sign in with your name and passcode.

Sign in without a badge

Fully in: until the reel stops

The sensor sits at the back of the bay. It sees the reel only when the reel touches the back stop.

Stopped shortThe sensor at the back sees nothing.
Still goingKeep pushing, straight in.
Fully inIt touches the back stop. The bay turns green steady.

Before you go

Open under your name:

  • Finish putting in R-2026-0109
    2 500 pcs of PN-SMAJ24A · waiting for its sensor at SR-01-T4-L31
    Finish now
  • Bring back R-2026-0057 from feeder 14
    1 800 pcs expected of PN-0603-10K · due back since 13:48. Count what is left when it comes back.
    Finish now

Hand on to anyone on Shift B now, or to the next shift. Shift B ends 22:00; nobody is on duty 22:00–06:00.

Prototype

Station

Preview stateIntake SR-01 · home

Later · not in R1

Simulate

View as

This page

Purpose
The pick station for SMT Line 2: Next lights a pick batch at SR-01.
Release
R1
First viewport
The rack · 1 focus · 1 start tile · 1 primary