SR-04 · Line-side rack D
Technical details
- Shape
- 2 sides × 4 tiers × 16 bays · tier 4 double height
- Controller
- …0311
- Address
- 192.168.0.25
- Floor label
- POS-L2-03
Adopt reels: bind the reels already in a rack to an imported stock list, one scan per lit bay
- Not in R1
- Release 1 starts stock fresh: no stock or custody import; a trusted prior layout (provisional placement) is later
- R1 instead
- Each bay that reads a reel at Put in service is an Unknown placement: pull the reel, scan it and put it in Open it
No job on SR-04
What you can do without a permit
You can identify the rack, read its sensors and try to reconnect it. Anything else needs a permit from the person who owns it.
Adopt reels
- Side A · tier 3
- 8 of 8 · done
- Side A · tier 2
- 4 of 16
- Side A · tier 1
- 0 of 16
Records come from the import line2-shelf.xlsx (Eszter Szabó). A scan binds the reel to the bay it is in.
Next bay · lit amber
SR-04-A-T2-L05A handheld scan works the same. Each bay settles to green steady when its reel is adopted.
- 12 reelsside A, tier 3 and tier 2 bays 1–4 · Márta Kovács · PDA-04Adopted
Bays
- Blinking amber · reel with no record
- Adopted · green steady
- Differs from the import
- Empty
Connection path
- Janus serverjanus-smt-line2Running
- Rack networken5 · approved Mon 18 AugOnline
- Controller …0311192.168.0.25:502Online since 14:32 · 22 ms
- RS-485 bus 18 of 8 bay boards + tower board 9OK
- Sensors128 of 128 reportingOK
Identify
Tiers light amber in turn, then the rack flashes twice. 3 s.
Tower lights
- Side A tower Offno rule matches
- Side B tower Offno rule matches
Tower rules · the first match wins on each tower
- 14:32Handover accepted · Dávid Horváth’s rights on SR-04 endedEszter Szabó
- 14:32Added to service · 128 bays · in handoverDávid Horváth · Rack setup
- 14:31Checks passed · 8 bay boards + tower board 9 · 128 of 128 bays read emptyController · Rack setup
- 14:28Address applied · 192.168.0.10 → 192.168.0.25Dávid Horváth · inside the pool approved by Eszter Szabó
- 14:24Named SR-04 · rack label RACK-SR-04 · SMT Line 2 · position 3Dávid Horváth · Rack setup · floor label POS-L2-03 scanned
- 14:21Identified · controller …0311Dávid Horváth · confirmed at the rack
Place
About place
Where the rack stands. It changes only through Move; bays and reels keep their records.
- Where
- SMT hall › SMT Line 2 · position 3
- Floor label
- POS-L2-03 · on the floor in front of the rack
- Rack labels
- RACK-SR-04 · one on each end · printed at Add to service
- Home station
- None · operators switch to it by scanning RACK-SR-04
- Switch port
- P6 · seen 06:02
Planned in Rack setup at Where it is. After Add to service it changes only through Move.
Place history · 1at SMT Line 2 · position 3 planned 14:24
- SMT Line 2 · position 3planned 14:24 · Floor label scanned in Rack setup by Dávid Horváth
Setup
About setup
The setup record is read-only after Add to service.
- Identify14:21 (done)
- NameSR-04 (done)
- Where it isSMT Line 2 · position 3 (done)
- Address192.168.0.25 (done)
- Shape2 × 4 × 16 (done)
- Check it answersPassed 14:31 (done)
- Add to service14:32 (done)
Built by Dávid Horváth · added to service 14:32 · accepted by Eszter Szabó.
Storage and shape
About storage and shape
Fixed at Add to service. Bay widths and names change in Layout.
- Holds
- Reels
- Shape
- Two sides · 4 tiers × 16 bays per side · tier 4 double height
- Bays
- 128 · 1 board per tier per side
- Tower lights
- 2 · side A and side B, each set on its own
- Names
- SR-04-{side}-T{tier}-L{bay}