ST-01 · Stencil tower
Technical details
- Shape
- 4 tiers × 12 slots
- Controller
- CTRL-S01
- Address
- 192.168.0.24
- Floor label
- POS-ST-01
Stencil racks: stencils stored by slot, their tower, and taking a stencil out to a printer
- Not in R1
- Neo keeps the model shape for stencils but defers their qualification and journeys until after R1: release 1 stores reels only
- R1 instead
- Reel racks only. Stencils stay where the site keeps them today, outside Janus Open Equipment
Reels Janus doesn’t know
Can’t be checked while CTRL-S01 is offline since 07:12. Slots are read when it answers; a stencil with no record goes to Review.
Slots
- Unknown · offline since 07:12
Connection path
- Janus serverjanus-smt-line2Running
- Rack networken5 · approved Mon 18 AugOnline
- Controller CTRL-S01192.168.0.24:502No answer since 07:12Open in Connections
- RS-485 bus 1behind the controllerUnknown
- Sensors0 of 48 reportingUnknown
Offline check
- PowerIs the controller’s power light on? The controller sits in the tower base, behind the lower panel.
- Network cableLink light on at the controller and at its switch port. Reseat the cable at both ends.
- AddressCTRL-S01 should answer at 192.168.0.24. Connections shows whether anything answers there and whether its serial moved. Open CTRL-S01 in Connections
- Restart the controllerSwitch it off for 10 s, then on. Janus reconnects by itself within 5 min, or at once with Try to reconnect now.
Reconnect attempts
About reconnecting
A reconnect only reads, so anyone at the tower may try it. When CTRL-S01 answers, every slot is read before any light is set.
Tower lights
- Tower light Unknownoffline since 07:12
Tower rules · the first match wins on each tower
Which readings count
When a reading counts
A reading counts only when the board answered, in the current connection, and newer than the last one Janus used. The controller saying “received” is not a reading.
| Part of tier | Board | Reading | Last good reading | Counts |
|---|---|---|---|---|
| Tier 1 · 1–12 | board 1 | No answer | 07:12 | No — Unknown |
| Tier 2 · 1–12 | board 2 | No answer | 07:12 | No — Unknown |
| Tier 3 · 1–12 | board 3 | No answer | 07:12 | No — Unknown |
| Tier 4 · 1–12 | board 4 | No answer | 07:12 | No — Unknown |
- 14:32Reconnect attempt · no answerJanus · attempt 106
- 07:22Reconnect attempts every 5 minJanus · after 20 attempts every 30 s
- 07:12Offline · CTRL-S01 stopped answeringJanus · 48 slots Unknown · tower light unknown
- 06:02Controller onlineJanus · after planned restart
Place
About place
Where the rack stands. It changes only through Move; bays and reels keep their records.
- Where
- Stores › Stencil room · position 1
- Floor label
- POS-ST-01 · on the floor in front of the rack
- Rack labels
- RACK-ST-01 · one on each end
- Home station
- None · operators switch to it by scanning RACK-ST-01
- Switch port
- P4 · seen 07:11
Move becomes available once CTRL-S01 answers: the new place is confirmed by reading every slot.
Place history · 1at Stencil room · position 1 since Fri 12 Sep
- Stencil room · position 1since Fri 12 Sep · Set up there by Dávid Horváth
Setup
- IdentifyFri 12 Sep (done)
- NameST-01 (done)
- Where it isStencil room · position 1 (done)
- Address192.168.0.24 (done)
- Shape4 × 12 (done)
- Check it answersPassed (done)
- Add to serviceFri 12 Sep (done)
Added to service by Dávid Horváth on Fri 12 Sep.
Storage and shape
About storage and shape
Bay widths and names change in Layout.
- Holds
- Stencils
- Shape
- One side · 4 tiers × 12 slots
- Slots
- 48 · each with its own light · 1 board per tier
- Tower lights
- 1 · on top
- Names
- ST-01-T{tier}-L{slot}
Rack behaviour
About rack behaviour
Written to the controller.
- Slot light brightness
- 80 % · last written Fri 12 Sep
- Check-in interval
- 1000 ms
CTRL-S01 is offline, so these can’t be read or changed now.
How often Janus reads each board
About how often janus reads each board
Set by Janus. A board with no answer is read less often.
| Board | Reads | Pace | Actual | Why |
|---|---|---|---|---|
| board 1 | Tier 1 | Paused · offline | No answer | Controller offline since 07:12 |
| board 2 | Tier 2 | Paused · offline | No answer | Controller offline since 07:12 |
| board 3 | Tier 3 | Paused · offline | No answer | Controller offline since 07:12 |
| board 4 | Tier 4 | Paused · offline | No answer | Controller offline since 07:12 |
Retire this rack
About retire this rack
Empty it, switch it off, then retire it.
- Check2 things block this
- Emptying
- Switched off
- Retired
- Blocks29 stencils must be moved out first
- BlocksOffline since 07:12: empty can’t be confirmed
Retired racks keep their history; their bays are closed and can't be reopened. To use the rack again, set it up again.
Starting stops new put-ins on ST-01. It can be continued from any station.
Not available until the blockers are cleared.