Draft · at Address
How the address is set
The Janus Service CLI set this rack port and its address plan on this computer. Janus picks a free address inside it and never changes the computer’s network.
The controller restarts once, about 20 s. Only its readback proves the new address. No answer after the restart is Unknown: Janus looks for the controller at both addresses and never sends the change twice.
Now on 192.168.0.10, the factory default, outside rack port 1’s subnet.
Rack port 1 · requirements met
Faults and blocked work stay here until fixed. Notices can be cleared.
SR-02 is limited
Bence Tóth is on itsince 09:41 · 4 h 51 min14:30 installation map v4 drafted by Dávid Horváth under permit · waiting to be applied
Tier 3, bays 1–16 are Unknown. Blocks 2 take-outs for WO-260714-09 and hides 310 pcs of PN-QFN32-MCU7. The rest of SR-02 works.
Label not recognised
A Würth Elektronik label matched no code rule.
Put-in not finished
Reel R-2026-0109 is waiting for the sensor at SR-01-T4-L31: finish putting it in, or cancel.
Counter ReelSave is failing
Owner: line counter vendorsince 13:48
12 messages waiting. SMT Line 2 counters don't know about reels taken out since 13:48.
Snapshot taken · 14:30
Verified · off-host copy 14:30. Snapshots every 15 min while Janus is busy.
Scans and bay lights on this station use the working rack. Opening another rack never switches it.
Applies to this station only. Records keep the words they were written in.
It stays in Rack setup as Setup paused, under your name. Anyone with setup access can continue it. If it is still paused when your service visit ends, Sun 28 Sep 18:00, it passes to Eszter Szabó, who sponsors the visit.
SR-04 · Line-side rack D · Rack setup
