:00Thu 24 Sep

System

Strict · version 14

Switch to Relaxed…Roll back to version 13…

About Policies

Policies are the rules every rack and station decides by. Each change is a new version: it shows its impact on open work first, and going back is one more version through the same review.

Presets

Strict or Relaxed sets every preset value at once, in one version. A value set for the site, a rack, an item or a station overrides the preset where it applies: the first matching rule wins, from the most specific scope to the site.

What never relaxes

Approvals are off until switched on per action and scope. Fixed safeguards never relax. Publishing needs the policy grant; switching the preset needs it site-wide.

The light language · DP15

Reel bays: one colour and mode per signal, chosen within the bench-proven set. The first-shift card follows the version in force.

First-shift card
  • Put a reel in here
    Put-in bay
  • Take this reel out
    Take-out bay
  • Stored, matches the record
    Every bay holding a reel on record · Off: dark until it is needed
  • A reel is here that shouldn’t be
    Reel, no record
  • Removed without a take-out, or a fault
    Taken out without a take-out
  • Here it is
    Light up bay · off by itself after the Light up timer

Blink is 500 ms on, 500 ms off, in one shared phase. Empty and out-of-service bays stay off. Light up switches off after 30 s (a timer).

Taken-out alarm

The alarm delay is a timer: 5 s now.

Wrong-bay reel

Quiet zones

A rack in a quiet zone lights the same, without sound.

  • SR-01 · Reel rack A
  • SR-02 · High-capacity rack B
  • SR-03 · Line-side rack C

Show it on a bay

SR-01 · tier 3 · bays 11–17

SR-01-T3-L14 holds R-2026-0042 and shows green · steady now.

Then: the bay returns to what it showed. Nothing is recorded as a movement.

Versions · 14Every change, who published it, and a way back
  1. v14Eszter Szabó · Tue 16 Sep 10:40 · 2 changesIn use
  2. v13Eszter Szabó · Tue 2 Sep 09:12 · 2 changes
  3. v12Eszter Szabó · Mon 1 Sep 11:05 · Strict preset · 3 changesSee changes
    • SR-02 sound: Site sound → Silent (quiet zone)
    • Missing delay at rack SR-02: 30 min → 1 h
    • DP11 at Station SMT-1: Not counted allowed

Publish 0 changes as version 15?

New decisions use it at once; open work keeps its version. Online racks change on their next read; ST-01 gets it when it reconnects.

Changes
ValueNowAfter

Impact preview

    Switch the site to Strict as version 15?

    Every site-scope rule, grant template and approval switch changes at once: every command is decided under the whole old or the whole new preset, never a mix. Rules at a rack, item or station stay.

    No site value changes.

    Access that changes
    ActionStrictStrict
    Report issued; Report missing from Line or Receiving; Consume from Missing; Consume reversal; Adjust quantity by countSupervisor · approvals availableGranted to operators
    Void tentative issueSupervisorOperator at the recovery review; supervisor outside it
    Release a blocking condition (not Item unconfirmed)Supervisor, with a reasonA role the policy grants, with a reason
    Report missing from a bay by decision; Taken to line after an outageSupervisor · approvals availableGranted to operators
    Attestation: “Confirm all — nothing was touched”Supervisor with step-up; never the Unidentified operatorOperator, named sign-in only
    Take in for check; Cancel another person’s receipt or returnSupervisorGranted to operators
    Scrap; RestoreSupervisor · approvals availableSupervisor
    Issue from a Sensing disabled bay by decisionNot allowedSupervisor decision
    Switch a unit, tier or board into manual operationSupervisor with step-upUnchanged
    Approvals (maker–checker)Available per action and scope · offOff

    Impact preview

    • Open work
      Open tasks, removals and the SR-02 outage episode keep version 14. New ones use Strict.
    • Your draft
      Your unpublished edits stay on top of the new preset.

    Switching needs the policy grant and grant management over every affected scope, in this one command. A policy grant on a rack subtree publishes there, never a site-wide preset.

    Roll back to version 13?

    One step: version 15 gets the values of version 13. Version 14 stays in Versions. Open work keeps its version.

    Values that go back
    ValueNowAfter
    Soundwas Preset 2 · audiblenow Preset 1 · soft
    Buzzer forwas 3 snow 5 s

    Alerts

    Faults and blocked work stay here until fixed. Notices can be cleared.

    SR-02 is limited

    Bence Tóth is on itsince 09:41 · 4 h 51 min14:30 installation map v4 drafted by Dávid Horváth under permit · waiting to be applied

    Tier 3, bays 1–16 are Unknown. Blocks 2 take-outs for WO-260714-09 and hides 310 pcs of PN-QFN32-MCU7. The rest of SR-02 works.

    Troubleshoot SR-02Stays until fixed

    Label not recognised

    A Würth Elektronik label matched no code rule.

    Add label rule

    Put-in not finished

    Reel R-2026-0109 is waiting for the sensor at SR-01-T4-L31: finish putting it in, or cancel.

    Continue put-in

    Counter ReelSave is failing

    Owner: line counter vendorsince 13:48

    12 messages waiting. SMT Line 2 counters don't know about reels taken out since 13:48.

    Open Integrations

    Snapshot taken · 14:30

    Verified · off-host copy 14:30. Snapshots every 15 min while Janus is busy.

    Choose working rack

    Scans and bay lights on this station use the working rack. Opening another rack never switches it.

    Racks

    Help

    What the words mean

    Language

    Applies to this station only. Records keep the words they were written in.

    Prototype

    Policies · System

    Preview stateDraft with changes

    View as

    This page

    Purpose
    Presets, one row per decision, an impact preview and versions; tower lights.
    Release
    R1
    First viewport
    1 primary · 1 notice · 3 blocks