The handheld's capture journal: scans kept on the device while Janus can't be reached, listed as Not sent yet and sent in order later.
- Not in R1
- R1 keeps no client-side queue or capture journal (architecture/system-structure.md §6.5): a lost connection stops the handheld.
- R1 instead
- The stop signal: a strip over the task bar says "Not connected — nothing is being booked", and the last actions say what became of each write. Open it
Pull the trigger (simulated scan)
Next at SR-01
3 open under your name · in time orderContinue WO-260714-07 · line 4
Take R-2026-0164 from
T4-L12
Tier 4 of 5 · left half · SR-01Scan
Not sent yet 2 · oldest 14:31
Kept on PDA-04. Nothing is recorded and no bay lights until Janus answers.
- SR-01-T3-L1514:31
- R-2026-005714:31
Last scans on this handheld
- RACK-SR-0114:28
Last actions on this handheld
Nothing sent from this handheld in this session.
SR-01 · Reel rack A
OnlineSMT Line 2 · position 1
- T2-L10 · unexpected removal since 14:21 · Missing at 14:51 unless pushed back
- Left tower yellow · attention on this rack
- T4-L31 and the right tower blink green · the put-in of R-2026-0109 is open
Switch rack
Or scan the label on the rack end: RACK · SR-02. Your open work stays yours.
Márta Kovács
Operator · Shift B · signed in by badgeThis handheld
- Device
- PDA-04 · handheld · follows its user
- Connection
- Online
- Scanner
- Hardware trigger
Scanned
Waiting for Janus…
- Scanned, done
- Recognised, done
- Bay lit, now
- Sensor, not yet, sensor-confirmed
- Stored, not yet
Finish the put-in of R-2026-0109 into
T4-L31
Tier 4 of 5 · right half · SR-01About this reel
You started this put-in at 14:20. Finishing it covers WO-260714-09's 480 pcs short.
- Reel
- R-2026-0109PN-SMAJ24A · TVS diode
- Quantity · from label
- 2 500pcs
Stored.
R-2026-0109 is stored at SR-01-T4-L31 · 14:32.
- Scanned, done
- Recognised, done
- Bay lit, done
- Sensor, done, sensor-confirmed
- Stored, done
Preview · not recorded
- By
- Márta Kovács · PDA-04
- Confirmed by
- Sensor · T4-L31 empty → reel · 14:32:13
- Scanned, done
- Recognised, done
- Bay lit, done
- Sensor, needs review, sensor-confirmed
- Stored, not yet
Still lit. Push until it stops.
Push it further into T4-L31. Don't take it out.
Technical details
- Reference
- K7-Q4M2
- Error code
- sensor-timeout
- Last sensor read
- L31 empty · 14:32:19
Put back R-2026-0057
What is left on the reel?
Taken out 13:48 to SMT Line 2 · 1 800 pcs on record
One question. A count is prefilled only from the MES, and says so; the recorded quantity is never a one-tap answer.
From MES Line reports 2 310 pcs
- Scanned, done
- Recognised, done
- Bay lit, now
- Sensor, not yet, sensor-confirmed
- Stored, not yet
Take R-2026-0012 from
T2-L28
Tier 2 of 5 · right half · SR-01then → SMT Line 2
L27 · same part · leave it
- Reel holds
- 4 820pcs
- Line takes
- 4 000pcs
- Comes back
- 820pcs
On your cart.
On your cart 3 of 3 from SR-01
Next stop · SR-03 · T2-L09
Take them to SMT Line 2. No scan is needed at the line: the sensor recorded each take-out.
Preview · not recorded
- By
- Márta Kovács · PDA-04
- Work order
- WO-260714-07 · item 6
- Confirmed by
- Sensor · T1-L25 reel → empty · 14:32:52
Find a reel
Scan or type a reel, a part or a bay. Its bay lights amber steady for 30 s.
At SR-01
R-2026-0036 is in
T4-L27
Tier 4 of 5 · right half · SR-01Amber steady · here it is. Off by itself after 30 s.
SR-03 · tier 1
T1-L11
Pull the reel, scan it, push it back in.
Every bay settled.
SR-03 tier 1 · the count is in.
Then: a supervisor posts each difference with a movement Janus already has (Report missing, Mark found, Transfer). Nothing moved while you counted. Leave the reels where they are.
SR-03 · tier 1
10 of 16 read · all agree so far
T1-L11
Look in the bay. Scan the reel's label, or tap Empty.
R-2026-0011 is out of T2-L07
T2-L07
Tier 2 of 5 · left half · SR-01Or choose a reel stored at SR-01
Where does it go? free bays
Or scan the label on any free bay.
Moved.
R-2026-0011 is stored at SR-01-T2-L08.
Preview · not recorded
- By
- Márta Kovács · PDA-04
- Confirmed by
- Sensor · T2-L07 reel → empty · 14:32:08
Sensor · T2-L08 empty → reel · 14:32:21
In the Review queue.
Preview · not sent
- Item
- Can't find a reel · SR-01
- By
- Márta Kovács · PDA-04
- At
- 14:32:30
- Decides
- A supervisor · Bence Tóth is on shift
A supervisor decides in the Review queue.
Hand over
Open under your name. Choose what László Varga takes.
Handed over.
3 open items to László Varga.
Preview · not recorded
- From
- Márta Kovács · PDA-04
- To
- László Varga
- Hand on Continue WO-260714-07 → László Varga
- Hand on Finish putting in R-2026-0109 → László Varga
- Hand on Bring back R-2026-0057 from feeder 14 → László Varga
Scan your badge.
Nobody is signed in on PDA-04. The next movement is recorded under the badge you scan.
No badge? Sign in with name and passcode